Eurofins Product Testing - Accreditation

Eurofins Product Service GmbH is DAR accredited Testing Laboratory by DATech (a part of TGA GmbH) for EMC, SAR, Radio and Telecommunication Systems

(Wireless Radio (UMTS, GSM/DCS/PCS/GPRS/EGPRS/HSDPA), Short Range Devices (SRD), Low Power Devices (LPD), Public Mobile Radio (PMR), Mobile Earth Stations (MES), Radio transmitter, Cordless Telephones (DECT, UPCS, CT1, CT1+, CT2), Wide Band Transmission Systems, Integrated Services Digital Network (ISDN), Corded Telephones

DAR-Registration Number: DAT-P-268/08

Eurofins Product Service GmbH is A2LA accredited Testing Laboratory for Electrical Testing for EMC and Product Safety

Eurofins Product Service GmbH is KBA (Federal Motor Transport Authority) designated Technical Service for EMC and Anti-theft device.

KBA-designation no. KBA-P 00059-97

Eurofins Product Service GmbH is NSAI (National Standards Authority of Ireland) appointed Technical Service as prescribed in Directives 70/156/EEC, 2003/37EEC and 2002/24/EEC.

Eurofins Product Service GmbH is ZLS (Central Authority of the German Federal States for Safety) accredited Testing laboratory and Certification Body for awarding the GS-Mark in accordance to the Equipment and product safety Act (GPSG)

Registration Number ZLS-P-752/08 (GS-Laboratory)
Registration Number ZLS-ZE-609/08 (GS-Certification)

BAuA-Listing - German Federal Institute for Occupational Safety and Health

Eurofins Product Service GmbH is IECEE CB Scheme recognized Test Laboratory (CBTL) and National Certification Body (NCB)

CB-Laboratory TL149
CB-Certification CB058

IECEE.org

Click here for information on our CB accreditation for Photovoltaics

Eurofins Product Service GmbH is CTIA Authorized Testing Lab (CATL) for GSM, OTA, UMTS           

Lab code 20020528-00
CTIA.org

Eurofins Product Service GmbH is FCC designated CAB (Conformity Assessment Body) to perform compliance testing on equipment subject to Declaration of Conformity (DoC) and Certification under Part15 and 18 of the Commission’s rules.

Designation Number DE0008

Eurofins Product Service GmbH is FCC authorized Telecommunication Certification Body (TCB) to certify equipment under Parts 1.1307, 2.1091 and 2.1093

Designation Number DE0005


Eurofins Product Service GmbH is FCC filed measurement facility (10 m Site) 

Registration Number 96970

Eurofins Product Service GmbH is Conformity Assessment Body (CAB) for Canada in the sector of Telecommunications on the basis of the agreement on Mutual Recognition between the European Community and Canada (98/566/EC).

Eurofins Product Service GmbH is testing laboratory recognized by Industry Canada to test to Canadian Terminal Attachment requirements CAB Identifier: DE0004

O.A.T.S filing on Industry Canada department

IC 3470A

Eurofins Product Service GmbH is Foreign Certification Body (FCB) recognized by Industry Canada to certify equipment to the Canadian radiocommunication and/or broadcasting requirements

Designation No. DE0004

Eurofins Product Service GmbH is Cospas-Sarsat accepted test laboratory for type approval tests on 406MHz distress beacons.
www.cospas-Sarsat.org

Eurofins Product Service GmbH is recognized Certification Body (RCB) by EMSD (Electrical and Mechanical Services Department Electrical Products (Safety) Regulation) Hong kong

Eurofins Product Service GmbH is NATA (National Association of Testing Authorities) Australia Recognized Testing Authority – Telecomms (RTA)

Recognised Testing Authorities (Telecomms)

Eurofins Product Service GmbH is VCCI (Voluntary Control Council for Interference by Information Technology Equipment) Japan recognized and listed test sites

Eurofins Product Service (Thailand) Co., Ltd. is TISI (Thai Industrial Standards Institute) accredited Testing Laboratory, Accreditation No. Testing 0167

Eurofins Product Testing A/S in Galten/Denmark is accredited in accordance with ISO/IEC 17025 by DANAK, This accreditation is valid world-wide via mutual recognition of accreditations within ILAC.

Eurofins Product Testing A/S is approved test house for DIBT Ü mark approval, using AgBB scheme emission testing protocol.

Eurofins Consumer Products Testing GmbH is approved as ÜZ inspection and certification body for DIBT Ü mark.

Eurofins Product Testing A/S is approved partner lab for SCS - Scientific Certification Services for several testing programs: FloorScore, ANSI/BIFMA M7.1/X7.1, Indoor Advantage and Indoor Advantage Gold. This includes Section 1350 testing. These testing programs are relevant for allowing to achieve LEED EQ credits by use of tested and certified products.

Eurofins Product Testing A/S is acknowledged as test house, and used as reference laboratory, for:

• EMICODE label on low emitting building products, such as adhesives, screeds, primers, underlays, adhesive tapes, sealants, parquet varnishes.

Eurofins Product testing A/S is approved test house for several Blue Angel labels:

• RAL UZ   38 - Wooden products, furniture, parquet, laminate, linoleum
• RAL UZ 102 - Wall paints
• RAL UZ 113 - Adhesives
• RAL UZ 117 - Upholstered furniture
• RAL UZ 119 - Mattresses
• RAL UZ 120 - Resilient (flexible) floor coverings, such as linoleum and rubber
• RAL UZ 123 - Sealants
• RAL UZ 128 - Textile floor coverings
• RAL UZ 130 - Wooden toys
• RAL UZ 148 - Leather for furniture

Eurofins Product Testing A/S is approved test house for:

• California specification "Section 01350"

• Scientific Certification Systems SCS

• FloorScore

• BIFMA

• CertiPUR

• CertiPUR US

• Danish Indoor Climate label

• Finnish M1 classification of low emission product

Section 01350

SCS

BIFMA

FloorScore

DICL
M1

Eurofins Product Testing A/S is approved test house for several Austrian 'Umweltzeichen' labels:
• UZ 54 - upholstered furniture
• UZ 55 - mattress
• UZ 56 - floor coverings (wooden, flexible and textile floorings)

Austria

Eurofins Product Testing A/S is acknowledged as test house for:

• GUT label on environmentally friendly textile floorings

• Testing for French VOC and CMR regulations (any ISO 17025 accredited lab can deliver data for showing compliance).

• Testing for French FDES data sheets, using the AFSSET evaluation scheme (any ISO 17025 accredited lab can deliver data for the FDES data sheets).

Eurofins Product Testing A/S is accredited by US Consumer Product Safety Commission CPSC for testing lead in paint for CPSIA in accordance with standard 16 C.F.R. 1303, click here for details.

These tests are relevant within the frame of Consumer Product Safety Improvement Act - CPSIA.

CPSC

Eurofins Modulo Uno in Turin (Italy) is ISO 9001 version 2000 Certification for the Quality System for:

- chemical, biological, microbiological, and physical laboratory assays
- controls and verifications of products and processes
- design and performance  of studies for the verification of efficiency, safety, hygiene, and quality of products and processes
- training courses.

Certified by Bureau Veritas since 1997

Eurofins Consumer Products - UNI CEI EN ISO/IEC 17025 accreditation by SINAL (National System for the Accreditation of Laboratories), since 1992

list of accreditated tests (SINAL website)

Eurofins Modulo Uno in Turin (Italy) is accredited in accordance with UNI CEI EN ISO/IEC 17025 by SINAL (National System for the Accreditation of Laboratories), This accreditation is globally valid via mutual recognition of accreditations within ILAC.

Test laboratory accredited according to UNI CEI EN ISO/IEC 17025 for the following tests areas:

• noise and vibration of products, machinery and work environments or environmental noise;
• electric;
• mechanical;
• energy products (thermal solar systems and photovoltaic modules).
• ergonomics of the thermal environment;

Registration number n° 0085

list of accredited tests (SINAL website) Test Site A

list of accredited tests (SINAL website) Test Site B

Italian Ministry of Health Authorisation to grant EC certification of Medical Devices in accordance with Directive 93/42/EEC, (O.N. no. 0477) - since 1997

Authorisation of the Italian Ministry of Industry, Commerce and Handicraft to grant EC certification for toys in accordance with Directive 88/378/EEC (O.N. no. 0477) - since 1992

Eurofins-Modulo Uno in Turin (Italy) is Notified body accredited by Italian Ministry of Economic Development for electromagnetic compatibility in accordance with the Directive 2004/108/EC - since 1997.

Registration number n° 2049 - NANDO listing

Eurofins-Modulo Uno in Turin (Italy) is accredited in accordance with UNI CEI EN ISO/IEC 17020 by SINCERT (National System for the Accreditation of Certification and Inspection Bodies).

SINCERT - Signatory of EA and IAF Mutual Recognition Agreements. This accreditation is valid world-wide via mutual recognition.

Inspection Body according to UNI CEI EN ISO/IEC 17020 - Inspection of Type “A” - in the following sectors:

• Building constructions, civil engineering works in general and related plants, works of protection, of environmental defence and naturalistic engineering
  Regarding the inspection type: Inspection of design building
• Industrial plants
  Regarding the inspection type: Inspection on the execution of electric plants in areas with risk of explosion

Registration number n° 030E - Accreditation

SIT - Accreditation

Eurofins-Modulo Uno in Torino (Italy) is accredited in accordance with UNI CEI EN ISO/IEC 17025 by SIT (Italian Calibration Service). This accreditation is valid world-wide via mutual recognition of accreditations within ILAC.

Calibration Center accredited according to UNI CEI EN ISO/IEC 17025 for the following calibration sectors:

• sound level meter and acoustic calibrators;
• audiometers;
• accelerometers.

Registration number n° 062

List of calibration measurement in SIT website.

CERTO - Accreditation